 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DN3545 N-Channel Depletion-Mode Vertical DMOS FETs Ordering Information BVDSX / BVDGX 450V * Same as SOT-89. RDS(ON) (max) 20 IDSS (min) 200mA Order Number / Package TO-92 DN3545N3 TO-243AA* DN3545N8 Die DN3545ND Product marking for TO-243AA: DN5M Where = 2-week alpha date code Product shipped on 2000 piece carrier tape reels. Features High input impedance Low input capacitance Fast switching speeds Low on resistance Free from secondary breakdown Low input and output leakage Advanced DMOS Technology These depletion-mode (normally-on) transistors utilize an advanced vertical DMOS structure and Supertex's well-proven silicon-gate manufacturing process. This combination produces devices with the power handling capabilities of bipolar transistors and with the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, these devices are free from thermal runaway and thermally-induced secondary breakdown. Supertex's vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired. Applications Normally-on switches Solid state relays Converters Constant current sources Power supply circuits Telecom Package Options D Absolute Maximum Ratings Drain-to-Source Voltage Drain-to-Gate Voltage Gate-to-Source Voltage Operating and Storage Temperature Soldering Temperature* * Distance of 1.6 mm from case for 10 seconds. BVDSX BVDGX 20V -55C to +150C 300C G D S TO-243AA (SOT-89) SGD TO-92 Note: See Package Outline section for dimensions. 12/13/01 Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the 1 Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website. DN3545 Thermal Characteristics Package TO-92 TO-243AA ID (continuous)* 136mA 200mA ID (pulsed) 1.6A 300mA Power Dissipation @ TA = 25C 0.74W 1.6 jc ja IDR* 136mA 200mA IDRM 1.6A 300mA C/W 125 15 C/W 170 78 * ID (continuous) is limited by max rated Tj. Mounted on FR4 board, 25mm x 25mm x 1.57mm. Significant PD increase possible on ceramic substrate. Electrical Characteristics (@ 25C unless otherwise specified) Symbol BVDSX VGS(OFF) VGS(OFF) IGSS ID(OFF) Parameter Drain-to-Source Breakdown Voltage Gate-to-Source OFF Voltage Change in VGS(OFF) with Temperature Gate Body Leakage Current Drain-to-Source Leakage Current Min 450 -1.5 -3.5 4.5 100 1.0 1.0 IDSS RDS(ON) RDS(ON) GFS CISS COSS CRSS td(ON) tr td(OFF) tf VSD trr Saturated Drain-to-Source Current Static Drain-to-Source ON-State Resistance Change in RDS(ON) with Temperature Forward Transconductance Input Capacitance Common Source Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Diode Forward Voltage Drop Reverse Recovery Time 800 150 360 40 15 20 30 30 40 1.8 V ns ns VDD = 25V, ID = 150mA, RGEN = 25, VGS = 0V to -10V VGS = -5V, ISD = 150mA VGS = -5V, ISD = 150mA pF 200 20 1.1 Typ Max Unit V V mV/C nA A mA mA %/C m Conditions VGS = -5V, ID = 100A VDS = 25V, ID= 10A VDS = 25V, ID= 10A VGS = 20V, VDS = 0V VGS = -5V, VDS = Max Rating VGS = -5V, VDS = 0.8 Max Rating TA = 125C VGS = 0V, VDS = 15V VGS = 0V, ID = 150mA VGS = 0V, ID = 150mA ID = 100mA, VDS = 10V VGS = -5V, VDS = 25V f = 1 MHz Notes: 1. All D.C. parameters 100% tested at 25C unless otherwise stated. (Pulse test: 300s pulse, 2% duty cycle.) 2. All A.C. parameters sample tested. Switching Waveforms and Test Circuit 0V 90% INPUT -10V PULSE GENERATOR Rgen 10% t(ON) t(OFF) tr td(OFF) tF td(ON) VDD 10% 10% INPUT OUTPUT 0V 90% 90% 2 VDD RL OUTPUT D.U.T. Typical Application Curves Output Characteristics 0.7 0.6 Saturation Characteristics VGS = +2V +1.0V VGS = +2.0V 0.6 1.0V 0V 0V 0.5 -0.5V ID (Amperes) 0.5 -0.5V ID (Amperes) 0.4 0.4 0.3 -0.8V -0.8V 0.3 -1.0V -1.0V 0.2 0.2 0.1 -1.5V 0 0 50 100 150 200 250 300 350 400 450 0.1 -1.5V 0 0 2 4 6 8 10 VDS (Volts) VDS (Volts) Transconductance vs. Drain Current 0.8 V DS = 10V Power Dissipation vs. Ambient Temperature 2.0 T A = -55C TO-243AA GFS (siemens) 0.6 T 1.5 PD (watts) A = 25C 0.4 1.0 TO-92 T 0.2 A = 125C 0.5 0 0 0.1 0.2 0.3 0.4 0 0 25 50 75 100 125 150 ID (Amperes) TA (C) Maximum Rated Safe Operating Area 1.0 1.0 Thermal Response Characteristics TO-92 (Pulsed) Thermal Resistance (normalized) TO-243AA (Pulsed) TO-243AA 0.8 T = 2 5 C A P = 1.6W D TO-243AA (DC) ID (Amperes) 0.1 TO-92 (DC) 0.6 0.4 0.01 0.2 TO-92 T = 2 5 C C T 0.001 1 A =25C 0 10 100 1000 0.001 0.01 0.1 P = 1.0W D 1 10 VDS (Volts) tp (seconds) 3 Typical Application Curves 1.2 BVDSS Variation with Temperature 50 ID = 100A VGS = -5V 40 30 20 10 0 On Resistance vs. Drain Current BVDSS (Normalized) 1.0 0.9 RDS(ON) (ohms) 1.1 VGS = 0V 0.8 -50 0 TJ (C) 50 100 150 0 0.2 ID (Amperes) 0.4 0.6 0.8 Transfer Characteristics 1.0 0.8 VDS = 10V TA = -55C 1.5 VGS(OFF) and RDS(ON) w/ Temperature 2.4 VGS(OFF) (normalized) 0.6 0.4 0.2 0 TA = 25C TA = 125C 1.1 0.9 0.7 VGS(OFF) @ 10A 1.6 1.2 RDS(ON) @ 0V, 150mA -50 0 50 100 0.8 150 -3 -2 VGS (Volts) -1 0 1 2 0.5 0.4 TJ (C) 300 250 Capacitance vs. Drain Source Voltage VGS = -5V 3 2 1 0 -1 -2 -3 -4 40 Gate Drive Dynamic Characteristics ID = 150mA C (picofarads) 150 100 50 0 CRSS 0 10 20 30 CISS COSS VGS (volts) 200 VDS = 30V -5 VDS (Volts) 0 1 QG (Nanocoulombs) 2 3 4 5 6 12/13/010 (c)2001 Supertex Inc. All rights reserved. Unauthorized use or reproduction prohibited. 4 1235 Bordeaux Drive, Sunnyvale, CA 94089 TEL: (408) 744-0100 * FAX: (408) 222-4895 www.supertex.com RDS(ON) (normalized) 1.3 2.0 ID (Amperes) |
Price & Availability of DN3545N8
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |